Used Attachments

Stock #UA22118, Sale Price $58,000 Energy Class : 8,500lb Actual weight: 7350lbs, 6.28” Tool / chisel, Auto greaser, Impact Frequency: 400-505  bpm Stick pin: 100mm Link pin: 90mm Space between pin bosses: 15.25” Center to center of pins: 19.5” Rated Flow: 58 GPM to 79 GPM Minimum Operating Pressure: 2176 PSI  to 2321 PSI

Stock #UA24069, Sale Price $57,000 Unused Model HD-948T Cuts 48” deep, Currently set up for 6” wide, Dual motor drive, Hydraulic depth legs/stabilizers, 1” shank teeth, Fits to Vermeer RTX1250, Ditch Witch RT125, RT120, Toro RT1200 Attachment weighs: 8400lbs

Stock #UA24094, Sale Price $41,000 Like new, only used 1 time. 63” wide working width, 75” overall width, 36 Carbide hammers, Fits to skids steers with 90 to 120 hp, Requires 29 to 40 GPM, Hydraulic Pressure required 3200-5080 PSI Requires 14 pin electrical harness, Weighs 2680lbs

Stock #UA24001, Sale Price $35,000 63” wide working width, 75” overall width, 36 Carbide hammers, Fits to skids steers with 90 to 120 hp, Requires 29 to 40 GPM, Hydraulic Pressure required 3200-5080 PSI Requires 14 pin electrical harness, Weighs 2680lbs

Stock #UA23089, Sale Price $32,000 6” cutting depth, 76 teeth, Hydraulic side shift, Hydraulic depth and tilt adjustment, Attachment weighs 2,200lbs Requires High flow 30 to 45 GPM, Requires hydraulic pressure 3000 – 3500psi, Requires 14pin electrical harness,

Stock #UA22094, Sale Price Energy Class : 4,000lb Actual weight: 3,800lbs, 5.10” Tool / chisel, Stick pin: 80mm Link pin: 80mm Space between pin bosses: 12.25” Center to center of pins: 18.5”

Stock #UA23032, Sale Price $30,000 60” wide cut, 2 speed, With pressure gauge, 30 Carbide teeth, Requires High flow, Attachment weight: 2,300lbs

Stock #UA24023, Sale Price $29,000 Like new, only used a few times, 60” wide cutting width Requires: 35-52 GPM high flow with case drain line, Danfoss H1B 110cc 2 speed motor 34-knives, (Carbide teeth could be installed) Attachment weighs: 2400lbs Secondary edge guard on the tooth anvil Hydraulic motor case overpressure protection (COP) Heavy-duty synchronous drive belt Single 1-inch high grade bolt tooth fastening system Sale price…….. $29,000 Available new for $42,000

Stock #UA23030, Sale Price $27,000 Skid Steer Wheel Saw / rock saw 24” max depth, 8” wide, Hydraulic side shift, Hydraulic depth adjustments, Requires 7 pin electrical control harness, Requires high flow, Attachment weighs: 2800lbs,

Stock #UA23115, Sale Price $26,000 15 Carbide cutters, Excavator mount, Requires case drain line on excavator, 100MM pins, 23” center to center of pins, 16 5/8” clear between pin bosses. Weighs 3200lbs Max pressure: 6000psi

Ref #22042, Sale price $25,000 Side discharge conveyor, Attachment side shift, With tilt cylinder, Set up to cut 8” wide x 48” deep, Rock teeth, Fits to Vermeer RTX1250, RT1250 Does require a higher GPM attachment pump to be installed on the machine, Attachment weighs 6,000lbs,  

Stock # UA21058, Sale price $25,000 60” Cutting width, Skid steer mount, 46 cutters, Requires minimum of 35GPM, Piston Motor with case drain, Pressure gauge, Heavy Duty HARDOX Construction, Chevron style tooth patter draws material in, Attachment weight:  3100lbs

Stock #UA24071, Sale Price $25,000 Fits to Ditch Witch RT80, might also fit to RT95, RT115, RT120 Max depth: 36” Does not come with blade, Weighs 2,200lbs with no blade,

Stock #UA24072, Sale Price $23,000 Unused Skid Steer Wheel Saw / rock saw / concrete saw 17” max depth, 4” wide, Hydraulic side shift and depth adjustments, Hydraulic trench cleaner, Requires 5 hyd hose connection, Requires 8 pin or 14 pin electrical control harness, Requires high flow, Attachment weighs: 2500lbs,

Stock #UA24070, Sale Price $20,000 Fits to Ditch Witch RT45, RT55, RT80 ride on machines Hydraulic side shift, With 1 used blade, In great condition and ready to work,

Stock #Ua24004, Sale Price $18,500 Bit diameter: 32” 20 – 42 GPM, 4250 max PSI, Low RPM auger bit (7-16 RPM) leads to easy clean-up, No high-speed flying debris for a safer work zone The STUMPEX can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass, Larger diameter stumps are processed by making additional passes, A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge, Weighs: 1,368lbs Fits to skid steers, Available new for $26,500 Used sale price…..$18,500

Stock #UA21024, Sale Price $17,000 Energy class: 1800lbs Weighs:1900lbs Tool size: 4.3” Blows per minute: 420 Fits to excavators 22,000lbs to 44,000lbs Rental rates: $/day, $/week, $/month  

REF#24058, Sale Price $17,000 6” wide Rock and dirt chain, Cuts 6’ deep Fits to Ditch witch RT55, RT80, RT95, RT115 Removed from 2014 RT80 Weighs 3350lbs.

REF#23075, Sale Price $16,000 6” wide Rock chain, Cuts 4’ deep Fits to Ditch witch RT55, RT80, RT95, RT115 Removed from 2016 RT80, Weighs 3100lbs.

Sale Price $16,000, Stock #UA21073 60” wide cutting disc, Four point Hardened Steel teeth High flow, 32 to 45GPM HD Gear motor Weighs 2,300lbs

Sale price $15,0000 Cuts 18” deep, 10” wide, Hydraulic stabilizers, Came off of Ditch Witch RT80, Fits RT70, RT80, RT95 and could be modified to fit other brands,

Stock #UA23058, Sale Price $14,000 Fits to Vermeer T655 trenchers May also fit T755. 6’ max dig depth, 40” end roller, Narrow boom for 4502 chain, Weights 4600lbs

Stock #UA24037, Sale Price $14,000 16″ max depth cut, Hydraulic depth adjustment, Vacuum hose connection, Universal skid steer mount, Center or offset cut, Mount can be attached to either end for push or pull operation, Requires 2 separate hydraulic circuits plus case drain (5 line set up) Max 25GPM hydraulic flow, Fits to Ditch Witch SK3000 skid steer and all other full size skid steers Attachment weight with out blade: 1400lbs Sale and rental prices do not include a blade,

Stock #UA23127, Sale Price $13,000 Car body forks, 64” wide carriage, 74” long x 6” X 3” fork tines, Attachment weight: 2300lbs Fits to: Volvo wheel loaders L50, L60, L70, L90, L110, L120 John Deere wheel loaders with HI Vis coupler, 524, 544, 624, 644 Like new, hardly used any if at all.

Stock #UA23080, Sale Price $13,000 Hydraulic Side shift, Hydraulic depth adjustment Hydraulic tilt, Requires minimum 35GPM Requires 7 pin electrical harness. Weights: 1200lbs

Stock #UA21061,  Sale price $13,000 2018 year model 26” cutter wheel with Greenteeth, Cuts forwards and Reverse, High torque piston motor, High flow required (36 to 45GPM), Case drain line required, Weights 720 lbs

Stock #UA23023, Sale Price $12,500 Hydraulic Side shift, Hydraulic depth adjustment Hydraulic tilt, Requires minimum 35GPM Requires 7 pin electrical harness. Weights: 1300lbs

Stock #UA24109, Sale Price $12,000 18″ Cold Planer Hydraulic side shift, 21 to 31 GPM Weighs 1610lbs

Stock #UA23009, Sale Price $12,000 73” wide vibratory smooth drum, Max 22 GPM , Plastic drum scrapers/cleaners, Weighs : 2200lbs

Stock #UA22105, Sale Price $11,500 Vibratory post driver, With Hydraulic tilt left to right option, Requires 7-26 GPM auxiliary flow, Requires case drain line, Requires electrical harness for tilt option. Has 12″ round post adapter (other sizes available) Weighs 675 lbs. Used price……$11,500 Available new for….$16,200

Stock #UA24059, Sale Price $11,000 JRB 420 series coupler Fork tines are 8” X 3.5” X 72” long, Carriage is 106”wide, Attachment weighs: 3,500lbs Fits to John Deere wheel loaders: 744K, 744L, Also fits to other brand loaders with JRB 420 coupler, Doosan, Case, Hitachi, Komatsu, and more

Stock #UA24066, Sale Price $10,000 Cat fusion coupler Fits to Cat 926, 930, 938, 950, 966, 972, wheel loaders Fork tines are 7” X 3.5” X 72” long, Carriage is 108” wide, Weighs: 2900lbs,

#UA24097, Sale Price $9,000 Hydraulic side shift Rock and dirt chain Cuts 48” deep Set for 6” wide Weighs: 1400lbs Hardly used, like new.

Stock #UA24020, Sale Price $8,500 Dual cylinder 48” high brush guard Cuts flush to the ground, Built-in 10 gallon chemical spray tank and 12 volt pump, 4″ chrome plated pins spiral cut hinge pins, AR-400 Blades Weighs 1950lbs Available new for $14,000 Sale price………………$8,500

Stock #UA24051, Sale Price $8,500 JRB 418 series coupler Fork tines are 7” X 2.75” X 72” long, Carriage is 78”wide, Attachment weighs: 2,600lbs Fits to John Deere wheel loaders with JRB 418 coupler: 624k, 624L, 644K, 644L, 724K, 724L, Also fits to other brand loaders with JRB 418 coupler, Doosan, Case, Hitachi, Komatsu, and more

Stock #UA22088, Sale Price $8,500 Series 2 Premium pick-up broom With water tank, 12volt pump and sprayers, Heavy 2″ main shaft, oversized 6″ bearings 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Available new for $13,600

Stock #UA24082, Sale Price $8,500 750lb Class hammer / breaker With skid steer mount and hoses, Weight with mount: 1050lbs Tool Diameter: 2.75” Flow Range: 10-22 GPM Impact Rate: 500 – 1,200 BPM

Stock #22116, Sale Price $8,500 Vibratory post driver, Requires 7-26 GPM auxiliary flow, Requires case drain line, Has 6″ post adapter (other sizes available) Weighs 300 lbs. Used price……$8,500 New Sale price….$13,500

Stock #UA24021, Sale Price $7,500 84” wide 29” tall, Requires 14 pin electrical harness, Weighs 1400lbs,

Stock #UA23008, Sale Price $7,500 48” max depth, Set up for 6” wide dirt cups, Hydraulic Side shift, Standard flow, max 22GPM, Weights: 1000lbs

Stock #UA22102, Sale Price $7,500 Series 2 Premium pick-up broom Heavy 2″ main shaft, oversized 6″ bearings, 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Sale price……$7,500 Available new for $13,600

Stock #UA22126, Sale Price $7,500 Volvo / John Deere Hi-vis coupler Fits to Volvo L60, L70, L90, L110, L120 loaders Fits to John Deere 444, 524, 544, 624, 644 loaders with Hi-vis coupler, Fork tines are 6” X 2.5” X 48” long, Carriage is 12’ 1” wide  

Stock #UA21096, Sale Price: $7,000(USED) 42″ wide cutting width 3 Blade system 6″ cutting capacity 3/4″ Thick blade carrier High torque piston motor 16 to 25 GPM Cutaway side No case drain needed Wire protection kit under deck Grease filled bearing drive housing Fits to Mini Excavators: 10,000lb to 19,000lb Has Kubota mount for KX040, KX057, KX080 Weighs 730lbs New price…$11,400 Used Price…$8,000  

Ref # 21018 , Sale price $7,000 Will fit Vermeer RTX550 and RTX450 machines Rock and dirt teeth, Set up for 5 1/2″ wide X 48″ deep cut. Weighs: 1750 lbs.

Stock #UA22025, Sale Price $7,000 Volvo Pin on mount, Fits to Volvo L110 and L120 wheel loaders, Fork tines are 7” X 3” X 72” long, Carriage is 97”wide, Attachment weighs: 2,900lbs

stock #UA24089, Sale Price $7,000 Unused Cat# 310-9390 Fits to Cat wheel loaders: 966GC, 966, 966K, 966H, 966M, 972, 972H, 972K, 972M and maybe others Weighs 1300lbs

Stock #UA23043, Sale Price $6,600 90mm main pin, 5 tine – 37” wide 76” long from end to center of pin 25” between pin bosses Unused thumb with main pin, cylinder, and cylinder mount, Fits to: Cat 325, 330, John Deere 240, 250, 270, 300, Hitachi 230, 270, Case CX240, CX290, CX330, Komatsu PC300, Kobelco SK250, SK290, SK330, Volvo EC240, EC290, and other excavators

Stock #UA23044, Sale Price $6,600 90mm main pin, 5 tine – 37” wide 76” long from end to center of pin 25” between pin bosses Unused thumb with main pin, cylinder, and cylinder mount, Fits to: Cat 325, 330, John Deere 240, 250, 270, 300, Hitachi 230, 270, Case CX240, CX290, CX330, Komatsu PC300, Kobelco SK250, SK290, SK330, Volvo EC240, EC290, and other excavators

Stock #UA21060, Sale Price $6,5000 50” wide cutting width, 3 Blades, Direct drive-thru bearing housing Turns clockwise and counterclockwise, 80CC Motor, 13-20GPM, Universal Mini Mount Weights 770lbs, With hoses and couplers, Fits to Vermeer, Ditch Witch, Wacker Neuson, Dingo and other brands, Machine photos is not included, Available new for …$9,600 Used price…$6,500

Stock #UA24106, Sale Price $6,000 Hydraulic pin grabber 90mm pins JRB part # 90A2405 Smart-Lock Like new condition with original paint, Fits to Komatsu PC300 excavator and others, 13.75” between pin bosses 20.25” center to center of pins Weighs: 900lbs Sale price… $6,0000

Stock # UA22016 72” wide tilling width, Standard flow  (11-22GPM) Weighs 930 lbs  

Stock #UA23060, Sale Price $6,900 84” wide, Hydraulic angle, 32” Poly bristles, Fits to all Bobcat brand skid steers, Requires 7 pin electrical harness, Attachment weighs 950lbs,

Stock #UA20023, Sale Price $5,900 Cat / Balderson Quick Coupler mount, Fork tines are 6” X 2.5” X 95” long, Carriage is 100” wide, Attachment weighs: 2,300lbs Fits to Cat Wheel loaders with Balderson Q/C:  926G, 928G, 938G, 950G, and more

Stock # 20053, Sale price $5,500  8’4” wide carriage, 6” X 2.5” X 60” long fork tines, Volvo and John Deere HiVis coupler,  

Stock #UA22095, Sale Price $5,500 150lb Class hammer / breaker With Bobcat MT mini mount Fits to Bobcat MT55, MT85, MT100, and Bobcat S70 Skid steers Weighs 250lbs

Stock #UA23122, Sale Price $5,500 36” max depth, 8” wide rock/dirt chain, 8- 14 GPM, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Weighs: 715lbs New price $6,800 Used price $5,500

Stock #UA22106, Sale Price $5,300 35 ton Capacity, Inverted design, 2 way wedge , Very heavy-duty sliders Opens to 30″ Weighs 950LBS Fits to all skid steers, Available new for $6,300 Used sale price…………..$5,300

Stock #UA23016, Sale Price $5,000 Fits to all skid steer loaders, 1.1yard heaped capacity, .95yard struck capacity, Over all dimensions: 45” X 84”, Hopper is 36” wide,

Stock #UA22122, Sale Price $4,900 84” wide Extreme duty series, Dual cylinder, Additional bolt on cutting edge, Weighs 920lbs Very good condition, Other styles and sizes available new or used,

Stock #UA22054, Sale Price $4,800 90mm main pin, 40.5” wide 69” long from end to center of pin 24” between pin bosses With main pin, cylinder and cylinder mount, Fits to: Cat 325, 330 John Deere 240, 250, 270, 300 Hitachi 230, 270 Case CX240, CX290, CX330 Komatsu PC300 Kobelco SK250, SK290, SK330 Volvo EC240, EC290 and other excavators,

Stock #UA23121, Sale Price $4,800 56” wide tilling width, Standard flow  (11-22GPM) 6″ tilling depth, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Weighs: 420 lbs New price $6,500 Used price $4,800

Stock# UA21095,  sale price $4,500 48” wide, Manual angle, Poly Bristles Fits to Vermeer, Ditch Witch , Toro and other mini skid steers, Weighs 646lbs  

Stock #UA23116, Sale Price $4,000 60lb Class hammer / breaker 1.5” tool diameter, Weighs 130lbs, 4” between pin bosses 30mm (1 3/16) pin

Stock #UA22037, Sale Price $3,900 74” wide Extreme duty series, Dual cylinder, Additional bolt on cutting edge, Weighs 960lbs, Other styles and sizes available new or used,

Stock #UA24010, Sale Price $3,500 60” wide Severe duty series, Dual cylinder/dual top clamps, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Mount could be changed to fit other larger skid steers,

Stock #UA23039, Sale Price $3,000 Snow Plow V-blade, Skid steer mount, 5 angle configurations including angle left, angle right, V, scoop, and straight, bold on rubber edge, Attachment only, does not include machine that is in photos, Fits to all skid steers,

Stock #UA23040, Sale Price $3,000 Fits in bed of Toolcat machines 12 volt motor and controls, Plastic / poly  hopper, Would fit in the back of most utility vehicles or small trucks,

Stock #UA22108, Sale price $2,900 Universal Mini Mount 2” hex shaft 5-10 GPM, Weights 190lbs, With hoses and couplers, Fits to Vermeer, Ditch Witch, Wacker Neuson, Dingo and other brands, Machine photos is not included, Rental rates: $110/day, $330/week, $990/month Available new for …$3,800 Used price…$2,900

Stock #UA23118, Sale Price $2,900 48” wide Dual cylinder, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Weighs: 360lbs New price $3,400 Used price $2,900

  36” wide, Single cylinder, Weighs 360lbs, Ref #22021  

Stock #1736, Sale Price $2,200 24” wide blade, 27” tall clear inside, 40mm pin size, 6 3/8” between pin bosses, Fits Cat 303 excavator and other machines

Measure: 11″ X 31″ 50% tread Has larger center hub to fit Bobcat S750 and S770 machines only Stock# 1650

REF#21044, Sale Price $1,200 Set of 4 tires and rims. 22.5 tires size, For snow plowing / blowing applications, Fit on Bobcat S740, S750 and S770 machines Set of 4 weight 650lbs total,

Stock #1876, Sale Price $600 Fits to loader backhoes and mini excavators Wain-Roy style coupler