Rental Equipment

Stock #22102, Sale Price $675,000 10’ Dig depth, 30” wide cut, Elevating cab, Dirt drags, 24” wide track pads, 40” end idler, 4501H double chain, Machine weight: 103,000lbs with 6’ boom, 110,000lbs with 10’boom, 415HP Cat Turbo Diesel, Pre Def (no emissions) ,

Stock # 23140 , Sale price $315,000 Cab with A/C and Heat, 8’ deep cut, Set up for 20” wide cut, Sectional boom, Folding/sliding discharge conveyor, Auto greaser, Hydraulic Cumber lift, 20” track pads, Dirt drags, 250HP John Deere Turbo diesel, Machine weighs:  57,000lbs  

Stock #23142, Sale Price $298,000 AC and heated cab, VPX1250I2 Vib plow attachment, Front reel carrier, Hydraulic reel tensioner, Front 6-way blade, Machine leveling left to right, Tracer tape reel, Dual cable trays on roof, Quad rubber track, 127 HP Deutz TCD3.6L turbo diesel, Radio, Work and flasher light kit, Machine weighs: 25,000lbs

Stock #23083, Sale Price $298,000 46 Ton Cap, 26.9Yd Struck Cap, 33yd heaped cap, 481HP John Deere 13.5L Turbo Diesel, 29.5-R25 Tires, 160 Gallon fuel tank, Machine empty weight: 72,000lbs

Stock #24089, Sale Price $295,000 Set up to cut 8’ deep X 26” wide, Rock chain, Elevating cab, Sliding offset discharge conveyor, Tilting tracks and machine leveling, 20” wide track pads, 275HP Cat C9 turbo diesel, Pre emissions (no def), Machine weighs; 75,000lbs

Stock #24048, Sale Price $290,000 8’ Dig depth, 27” wide cut, Elevating cab, Machine leveling option, Dirt drags, 20” wide track pads, 40” end idler, 4501 double chain, Approximant machine weight: 90,000lbs with 8’ boom, 350HP Cat Turbo Diesel Tier 3, No regen or emission filters,

Stock #24079, Sale Price $280,000 Cab with A/C and heat, 10’ 8” wide semi u blade, 5 pocket Vail ripper with 3 shanks, 205HP Turbo Diesel Machine weighs: 50,000lbs 23.5” wide track pads, 94 Gallon fuel tank,

Stock #23164, Sale Price $270,000 Cab with A/C and heat, 6 way VPAT blade 12’ 7” wide, 3 shank rear ripper, 215HP Cat C9.3 Turbo Diesel, 22” pads, Pre-wired for grade control, Backup camera, Machine weight: 53,000lbs new U/C at 5,200 hours

Stock #23155, Sale Price $245,000 FAE  mulcher attachment, 87” wide cutting width, Carbide teeth Hydraulic front mulcher door and hyd push bar, Rear-View Camera, 320 HP (239 kW) Cummins QSL9, High capacity auto reversing fan, Hydrostatic drive combined with two-speed transfer case, Attachment Pump: 100 GPM (378 LPM) @ 5,000 PSI (33,095 kPa) 127 gal. (481 L) Diesel tank, Ground Clearance: 22″ (56 cm) 12MPH max travel speed, Tire size: 28L – 26 Machine overall width: 9’ Machine height: 10’ 10”, Machine weighs: 39,000lbs

Stock #23067, Sale Price $235,000 25Ton Cap, With tailgate, 20Yd heaped Cap, 315HP Volvo D11M Turbo Diesel, 100 Gallon fuel tank, 23.5-R25 Tires, Machine empty weight: 55,000lbs Machine width, 9’7”

Stock #24064, Sale Price $235,000 Cab with AC and heat, JRB 418 quick coupler, Auxiliary hydraulics 3rd valve, Ride control / boom suspension, Backup camera, 4.75 yard GP bucket, 120” wide bucket, 249HP Turbo Diesel, 92 Gallon diesel tank, Machine weight: 42,000lbs, Forks available for additional cost,

Stock #24146, Sale Price $225,000 Hydraulic Q/C pin grabber, Counterweight removal system, Cab with A/C and heat, 367HP Turbo Diesel, 52” bucket, 12’10” Stick length, 35.5” triple bar grousers, Machine weight: 115,000lbs Machine width: 12’ 6” wide,

Stock #24055, Sale Price $220,000 Vermeer RW1252 Rock saw attachment, 52” Max depth cut, 7” wide cut, 125 HP Cummins  turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Foam filled tires, Machine weighs: 25,000lbs

Stock #23095, Sale Price $210,000 Cab with A/C and heat, Auto greaser, 367HP Turbo Diesel, 72” bucket, 11’2” Stick length, 35.5” triple bar grousers, Machine weight: 113,000lbs Machine width: 12′ 6″ wide, with JRB Q/C pin grabber

Stock #23065, Sale Price $210,000 Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension,, 3 yard GP bucket, 100” wide bucket, 174HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 31,500lbs, Forks available for additional cost,

Stock #23117, Sale Price $210,000 Cab with A/C and heat, 6-way blade 10’ 9” wide, 3 shank rear ripper, 165HP Turbo Diesel, 24” pads, Machine weight: 43,000lbs

Stock #24128, Sale Price $210,000 Vermeer RW1252 Rock saw attachment, 52” Max depth cut, 7” wide cut, Quad track 125 HP Cummins  turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Machine weighs: 28,000lbs

Stock #24063, Sale Price $200,000 Hydra wheel Rock saw attachment, 46” Max depth cut (116cm), 10” wide cut (25cm), Quad track, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Large front weight kit, Machine weighs: 27,500lbs,

Stock #24083, Sale Price $195,000 Cab with A/C and Heat, Cut width: 100″ Max Cut Depth: 16″ 450HP Cummins® QSX-15. Travel speed: 0-6 mph, High-flotation 620/75 R26 tires Joy stick-controlled steering, Four steering modes: coordinated steer, crab steer, front steer only, rear steer only, Cab can offset to the right side of the machine, Fuel Tank – 240 gal, Machine weighs:  60,000lbs

Stock #23066, Sale Price $190,000 Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension,, 2.75yard GP bucket, 100” wide bucket, 161HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 29,500lbs, Forks available for additional cost,

Stock #23169, Sale Price $185,000 40Ton Cap, With tailgate, 22Yd Struck Cap, 30yd heaped cap, 444HP Scania DC13 Turbo Diesel, 29.5-R25 Tires, 130 Gallon fuel tank, Machine empty weight: 72,000lbs

Stock #23163, Sale Price $180,000 New 2,500 Gallon Niece Water Tank installed in 2022, Two Rear Sprayers Left and right side Sprayers Rear gravity dump pipe/dispenser, Left and right side Sprayers Joystick Controlled Top Mounted Water Cannon Rear hose real, 130HP Cummins 4.5 turbo diesel, Auto trans with 6 forward and 3 reverse gears, 24mph Max Travel Speed 36 Gal fuel tank 800/45-30.5 flotation Tires 9’7” wide 10’ 6” tall Machine weight empty: 21,500lbs

Stock #22173, Sale Price $178,000 Quick coupler / pin grabber, Aux Hydraulics, 12’10” stick, Backup camera, Air ride seat, Straight travel pedal 60” bucket, 314HP Turbo Caterpillar C9.3 Engine, Triple Grouser Track Shoes, 33.5” wide tracks, Machine weighs 85,000lbs

Stock # 24134, Sale price $173,000 Cab with A/C and heat, 13’ 1” wide 6 way blade, 5 pocket Vail ripper with 5 shanks, Backup camera, 225HP Turbo Diesel Machine weighs: 55,000lbs 30” wide track pads, 116 Gallon fuel tank,

Stock #24031, Sale Price $170,000 Cab with A/C and heat, Rear multi shank ripper, 6 way blade, 10’6” wide blade, Sweeps / limb risers, Rear screens, Grade control ready, (Sale price does not include Trimble devices that may be seen in photos) 22” wide track pads, 130HP Cat C4.4 Turbo diesel Weights 33,000lbs,

Stock #24069, Sale Price $160,000 RW1240W Rock saw attachment, 40” Max depth cut, 12” wide cut, Standard air filled tires, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Large front weight kit, Machine weighs: 20,000lbs

Stock #23057, Sale Price $160,000 Cab with A/C and heat, Rear multi shank ripper, 6 way blade, 11’ wide blade, 125HP John Deere Turbo diesel 24” wide track pads, (30” LGP track pads can be installed on this machine) 75 Gallon fuel tank, Weights 35,000lbs,

Stock #24127, Sale Price $158,000 RW1240W Rock saw attachment, 40” Max depth cut, 10” wide cut, Standard air filled tires, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Large front weight kit, Machine weighs: 20,000lbs

Stock #22129, Sale Price $150,000 Hydraulic Q/C pin grabber, Dual purpose Aux Hydraulics, Control pattern changer, Reversing fan, 9’ 6” stick, Backup camera, Heated seat, Additional work lights 159HP Turbo diesel, Machine weighs : 51,000lbs, Machine width 10’ 6”

Stock #22041,   Sale Price $148,000 Cab with AC and heat 13’ wide 6 way blade, 33.5” wide track pads, Sweeps/limb risers, Side and rear screens, Machine weighs 44,000lbs 165HP Turbo Diesel,  

Stock# 23071, Sale price $148,000 14’ MB, 6 wheel drive Rear ripper/scarifier, Front push block, 255HP Turbo Diesel, Machine weights: 44,000lbs, 17.5/R25  tires, 8 speed forward and 8 speed reverse, Standard lever controls, Enclosed cab with A/C and heat,  

Stock #24098, Sale Price $148,000 20” tree capacity, 250HP John Deere turbo diesel, Throat opening (height x width) 20.5″ x 31″, Drum (width x diameter) 23.5″ x 37.4″, Hydraulic winch option, Hydraulic chute rotation, Remote control or tether control, 15.5” wide rubber tracks, 2 speed travel, Total weight:  16,000lbs

Stock #24091, Sale Price $145,000 Cab with A/C and heat, Rear ripper, 2.4yd tooth bucket (heaped), 97” wide bucket, 155HP Turbo diesel 22” wide track pads, Recently replaced undercarriage, Hydrostatic (HST) drive Machine weighs 42,000lbs Fuel tank cap: 69 Gallons

Stock #21103,  Sale price $145,000 14’ MB, 6 wheel drive Rear ripper/scarifier, Front push block, 255HP Turbo Diesel, Machine weights: 44,000lbs, 14.00/R24  tires, 8 speed forward and 8 speed reverse, Standard lever controls, Enclosed cab with A/C and heat, wider 17.5R25 tires and rims available  

Stock #22130, Sale Price $140,000 Hydraulic Q/C pin grabber, Dual purpose Aux Hydraulics, Control pattern changer, Reversing fan, 9’ 6” stick, Backup camera, Heated seat, Main Pin Hydraulic Thumb Additional work lights 159HP Turbo diesel, Machine weighs : 51,000lbs, Machine width 10’ 6”,

Stock #23115, Sale Price $140,000 Cab with AC and heat, JRB/Volvo Quick coupler, 3yd bucket, 3rd Valve auxiliary hydraulics, Boom suspension/ride control, Back up camera, 170HP Turbo Diesel, Logging Counterweight, Machine weighs 34,000lbs

Stock #23093, Sale Price $140,000 Cab with AC and heat, Backup camera, 4.4yard pin on GP bucket, 115” wide bucket, 191HP Komatsu Turbo Diesel, 23.5 R 25 Michelin tires, Machine weight: 41,000lbs,

Stock #23122, Sale Price $139,000 Center mount trencher, Set up for 8” wide X 48” deep, Carbide rock chain, Front backhoe with 18” bucket, 6 way backfill blade, 127 HP Deutz TCD3.6L Diesel Engine, Seat rotator, Creep control, Air tires, Machine weighs 19,000lbs,

Stock #23144, Sale Price $138,000 Cab with A/C and heat, Control pattern changer, Auxiliary hydraulics, 13’ 1” stick, 32” triple bar grousers, Machine weight: 80,000lbs

Stock #23012, Sale Price $135,000 Cab with A/C and heat, Rear multi shank ripper, 6 way blade, 10’ wide blade, 125HP John Deere Turbo diesel 22” wide track pads, 75 Gallon fuel tank, Weights 35,000lbs,

Stock #24027, Sale Price $129,000 8’1” wide blade, 16” pads, 3rd Auxiliary valve for ripper, Machine weighs 18,000lbs 71HP Turbo diesel, 53 Gallon fuel tank,

Stock #24068, Sale Price $125,000 Hydra wheel rock saw Hydraulic side shift, Cuts 30” deep X 6” wide, 74HP Turbo diesel, 4 wheel steer 4 wheel drive Foam filled tires Machine weighs: 15,000lbs

Stock #24130, Sale Price $120,000 Enclosed cab with A/C and heat, 10’ MB, 4 wheel drive Front scarifier, Articulated frame 120HP Cat C3.4 Turbo Diesel, Machine weighs: 17,000lbs, 15/19.5 tires, Full power shift with torque converter, 6 speed forward and 2 speed reverse, Top speed 24 mph forward, Standard lever controls,

Stock #24136, Sale Price $117,000 Pneumatic Tire Forklift 28,600lbs capacity 12’ 2’ max lift height, 160HP Cummins QSB4.5 turbo diesel, Fork tines are 7 7/8” X 3 1/8” X 8’ long, 88” wide max width on forks, Side shift, Fork positioning, Enclosed cab with AC and heat, 10.00 – 20 solid tires, Front and rear work lights, Forklift weighs; 37,500lbs, Like new machine,

Stock #24020, Sale Price $115,000 14’ MB, Mid scarifier, Backup camera, 204HP Volvo D7E Turbo Diesel, Machine weighs: 35,000lbs, 17.5/R25 Michelin tires, Standard lever controls, Enclosed cab with A/C and heat,

Stock # 22037, Sale Price $109,000 Zero tail swing, Hydraulic Pin grabber Q/C, Aux Hydraulics, Control pattern changer Backup camera, 23.5” track pads, 101HP Isuzu Turbo diesel, Machine weighs; 31,000lbs, Machine width 8’6”, 58 Gallon fuel tank,  

Stock #24107, Sale Price $105,000 RW526 Rock saw attachment, Cuts 26” deep, Set up for 6” wide, Front 6 way backfill blade, Foam filled tires, 65HP Deutz diesel, Machine weighs: 12,000lbs

Stock # 23154 , Sale price $105,000 Cab with A/C and heat, Rear ripper, 101 HP John Deere Turbo Diesel, 8’9” wide 6 way blade 18” wide track pads, Machine weighs: 22,000lbs,

Stock #23111, Sale Price $98,000 Cab with AC and heat, JRB/Volvo Quick coupler, 3yd bucket, 3rd Valve auxiliary hydraulics, Boom suspension/ride control, Back up camera, 170HP Turbo Diesel, Logging Counterweight, Machine weighs 34,000lbs

Stock #24087, Sale Price $98,000 Cab with AC and heat, 84” Vibratory Smooth drum, 130HP Cummins Turbo Diesel, Machine weighs: 30,000lbs 67 Gallon fuel tank,

Stock #23112, Sale Price $93,000 Cab with A/C and heat, High flow 41.6GPM, Dual Auxiliary hydraulics, 2 speed, SJC joystick controls, Power quick coupler, Air ride seat, 18” wide tracks, 114HP turbo diesel, Rated lift capacity @ 50% of Tip: 6200lbs, Machine is 84” wide, Machine weights: 16,100lbs, 30 Gallon fuel tank,

Stock #24124, Sale Price $90,000 RW526 Rock saw attachment, Cuts 26” deep, Set up for 6” wide, Sliding off set attachment, Front 6 way backfill blade, Foam filled tires, 65HP Deutz diesel, Machine weighs: 12,800lbs

Stock #23116, Sale Price $89,000 Cab with A/C and heat, 101 HP John Deere Turbo Diesel, 8’9” wide 6 way blade 18” wide track pads, Machine weighs: 22,000lbs

Stock #24043, Sale Price $88,000 Rear rippers, 6 way blade 8’9” wide, 18” wide track pads, 92HP John Deere turbo diesel, Machine weighs: 21,000lbs

Stock #24143, Sale Price $87,000 Cab with A/C and heat, Hydraulic thumb, Hydraulic pin grabber / QC, Keyless start panel, Rubber tracks, 65HP Turbo diesel, Machine weighs: 20,000lbs

Stock #23137, Sale price $86,000 4000 Gallon water tank, Front, rear, left side sprayers, Rear hose real, 300 HP Cummins/Paccar 5.9 turbo diesel, 8 speed Eaton Fuller manual transmission, 189 in Wheelbase, 54,600GVW 28,000 miles  

Stock #24101, Sale Price $85,000 10,000lbs cap, 54’ max lift height, Front outriggers, Auxiliary hydraulics, Left to right rotating fork carriage, 72” long fork tines, 72” wide carriage, Solid cushion tires, 74HP Cummins Turbo Diesel, (no DEF fluid) Machine weighs 27,000lbs

Stock #24042, Sale Price $80,000 8000lbs cap, 42’ max lift height, Auxiliary hydraulics, 60” long fork tines 60” wide carriage, Foam filled tires, 74HP Cummins Turbo Diesel, No DEF fluid, Machine weighs 27,000lbs

Stock #24073, Sale Price $80,000 RW526 Rock saw attachment Cuts 26” deep Set up for 5” wide Sliding off set attachment Front 6 way backfill blade Foam filled tires 65HP Deutz diesel Machine weighs: 12,00lbs

Stock #24016, Sale Price $80,000 Rotating platform/driver, Wireless Remote, Auto Plumb Feature, With Trimble LR410 receiver, 48Hp Cat C2.2 4 Turbo Diesel Tier 4 final, 12 in Rubber Tracks Maximum pile height – 15′ Impact drive type: High-frequency hammer Maximum hammer impact: 1500 bpm Maximum hammer energy: 950 Joules Machine weighs: 10,400 lbs, Travel Speed of 2.4mph.

Stock #24120, Sale Price $79,000 RW526 Rock saw attachment, Cuts 26” deep, Set up for 6” wide, Sliding off set attachment, Front 6 way backfill blade, Foam filled tires, 65HP Deutz diesel, Machine weighs: 12,300lbs

Stock #24070, Sale Price $79,000 RW526 Rock saw attachment, Cuts 26” deep, Set up for 4” wide, Sliding off set attachment, Front 6 way backfill blade, Foam filled tires, 65HP Deutz diesel, Machine weighs: 12,000lbs  

Stock #24051, Sale Price $78,000 MT12 micro trencher attachment Cuts 12” deep, 6 way backfill blade, 62HP Deutz diesel, Machine weighs: 9,400lbs

Stock #24100, Sale Price $77,000 Cab with A/C and heat, High flow, Brush package, Backup camera, 2 speed, Deluxe Keyless start, SJC joystick controls, Reversing fan, Auto boom suspension /ride control, Air ride seat, Power bobtach, Suspension seat, Torsion suspension, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs,

Stock #23053, Sale Price $76,000 Rear rippers, 6 way blade 8’9” wide, 16” wide track pads, 80HP John Deere turbo diesel, Machine weighs: 21,000lbs

Stock #24131, Sale Price $75,000 H342 rock saw attachment Cuts 18” deep Cuts 5″ wide 49HP Deutz diesel engine Front 4 way backfill blade Foam filled tires, Machine weights 6,500lbs

Stock #24123, Sale Price $74,000 RW526 Rock saw attachment, Cuts 26” deep, Set up for 6” wide, Sliding off set attachment, Front 6 way backfill blade, Air filled tires, 65HP Deutz diesel, Machine weighs: 11,250lbs

Stock #24044, Sale Price $73,000 2000 gallon Ledwell water tank, Front, rear, and left side sprayers, Rear hose reel, Air powered controls for sprayers, PTO driven pump, 200HP 6.7 Cummins turbo Diesel, 6 speed manual trans, Air brakes, Down rated by Ledwell to 25,999 GVW, 9,000 miles,

Stock #24139, Sale Price $72,000 AC and heated cab, High flow 36.6GPM, 2 speed, SJC controls, Power bobtach, Bucket positioning, Auto ride control / boom suspension, Suspension seat, Backup camera, 105HP Turbo Diesel, Machine weights: 9,700lbs

Stock #24151, Sale Price $72,000 84” Vibratory padfoot, 148HP Volvo Turbo Diesel, Machine weighs: 25,000lbs 72 Gallon fuel tank,

Stock #23114, Sale Price $70,000 49HP Yanmar diesel, 800 gallon spoil tank, 1000 CFM vacuum, 6-way hydraulic hose boom, 400 Gallon fresh water capacity Reverse Flow 3000 PSI Pressure Washer, Hydraulic front jack, Electric brakes, 17.5 size tires, 20,000lb GWR Trailer Hyd Door latch,

Stock #23096, Sale Price $69,000 49HP Yanmar diesel, 800 gallon spoil tank, 1000 CFM vacuum, 6-way hydraulic hose boom, 400 Gallon fresh water capacity Reverse Flow 3000 PSI Pressure Washer, Hydraulic front jack, Electric brakes, 17.5 size tires, 20,000lb GWR Trailer Hyd Door latch,

Stock #24034, Sale Price $68,000 54” Double Drum 45HP Kubota 2403 Diesel, 81 Gallon water tank, 14 Gallon fuel tank, Weighs 9,900lbs

Stock #24012, Sale Price $68,000 Enclosed cab with AC / heat, Quick coupler, Hydraulic thumb, OEM digging depth control option, Deluxe keyless touch panel, Radio, 49HP Diesel, Machine weighs 11,500lbs, 77” overall width, Control pattern changer,

Stock #24010, Sale Price $68,000 Cab with A/C and heat, High flow, 2 speed, Backup camera, Deluxe Keyless start, SJC joystick controls, Torsion suspension, Power bobtach, Bucket positioning, Air ride seat, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs

Stock # 24148 sale price $68,000 AC and heated cab, High flow, 2 speed, SJC controls, Power quick coupler Air ride Suspension seat, Backup camera, 14 x 17.5 tires, 80” bucket, 110HP Turbo Diesel, Machine weights: 9,600lbs

Stock #23131, Sale Price $67,000 2000 gallon water tank, Front, rear, and left side sprayers, Rear hose reel, Air powered controls for sprayers, PTO driven pump, 200HP 6.7 Cummins turbo Diesel, Auto trans, Air brakes, 33,000GVW 14,000miles,

Stock #24059, Sale Price $67,000 49HP Yanmar diesel, 1000 CFM vacuum, 500 Gallon Debris tank, 2 – 100 gallon fresh water tanks (total 200gallons), 4 gallon / 3000psi pressure washer, Electric brakes, 12,000 GVW

Stock #23058, Sale Price $65,000 84” Vibratory Smooth drum, 132HP Cummins Turbo Diesel, Machine weighs: 23,000lbs 72 Gallon fuel tank

Stock #23120, Sale Price $64,000 Cab with A/C and heat, High flow, 2 speed, Reversing fan, Deluxe Keyless start, SJC joystick controls, Torsion suspension, Bucket positioning, Power bobtach, Air ride seat, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs,

Stock #24005, Sale Price $64,000 High Flow 2 speed, Power quick coupler Back up camera, Auxiliary High Flow 40.4 gpm, Auxiliary 2nd Circuit 23.2 gpm, Hydraulic Pressure 3,481 psi Fuel Tank : 32 gal 111HP Kubota Turbo Diesel, Machine weighs 13,200lbs

Stock #24092, Sale Price $64,000 49HP Kubota diesel, 800 gallon spoil tank, 1025 CFM vacuum, 250 Gallon fresh water capacity 3000 PSI Pressure Washer, Electric brakes, 17.5” tires, 16,000lb GWR Trailer Hyd Door latch,

Stock #24050, Sale Price $64,000 24HP Kohler diesel, 500 gallon spoil tank, 580 CFM vacuum, 200 Gallon freshwater capacity Side hose and tooling storage under water tanks, Reverse Flow Manuel hose boom, 3000 PSI Pressure Water Electric brakes, 12,000lb GWR Trailer Hyd Door latch,

Stock #24057, Sale Price $61,000 Cab A/C and heat, High flow, Power bobtach, SJC joystick controls, Automatic ride control / boom suspension, 2 speed, Air ride cloth seat, Deluxe touchscreen start panel, 74HP Turbo Diesel, Machine weighs 10,500lbs, 18” wide tracks

Stock #24076, Sale Price 61,000 Cab A/C and heat, Power bobtach, SJC joystick controls, 2 speed, Air ride cloth seat, Deluxe touchscreen start panel, 74HP Turbo Diesel, Machine weighs 10,500lbs, 12” wide tracks,

Stock #24014, Sale Price $60,000 Cab with AC and heat, 27GPM High flow auxiliary hydraulics, Power bobtach, 4 wheel drive  and 4 wheel steer, Hydraulic dump bed, Rear receiver hitch, 17MPH max speed, 61HP Turbo Diesel, 60” wide, 81” tall,

Stock #23173, Sale Price $59,000 49HP Yanmar diesel, 800 gallon spoil tank, 1000 CFM vacuum, 400 Gallon fresh water capacity Reverse Flow 3000 PSI Pressure Washer, Electric brakes, 20,000lb GWR Trailer Hyd Door latch,

Stock #24008, Sale Price $59,000 Cab with A/C and heat, High flow, 2 speed, Backup camera, Deluxe Keyless start, SJC joystick controls, Torsion suspension, Power bobtach, Bucket positioning, Air ride seat, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs

Stock #23135, Sale Price $59,000 RW8540 Rock saw attachment Cuts 40” deep, Currently set up for 6” wide, 4 wheel steer, 6 way backfill blade, 99Hp 3.3 Cummins turbo diesel, Machine weighs 15,500lbs  

Stock #UA22118, Sale Price $58,000 Energy Class : 8,500lb Actual weight: 7350lbs, 6.28” Tool / chisel, Auto greaser, Impact Frequency: 400-505  bpm Stick pin: 100mm Link pin: 90mm Space between pin bosses: 15.25” Center to center of pins: 19.5” Rated Flow: 58 GPM to 79 GPM Minimum Operating Pressure: 2176 PSI  to 2321 PSI

Stock #24116, Sale Price $57,000 SO450 trencher attachment with side shift, Cuts 60” deep, Set up for 6” wide, Rock and dirt teeth Front 6 way backfill blade, B550 Front backhoe attachment 12” bucket, Foam filled tires, 65HP Deutz diesel, Machine weighs 10,600lbs,  

Stock #24024, Sale Price $57,000 66” Vibratory padfoot drum, 74HP Deutz Turbo Diesel, Machine weighs: 15,500lbs 50 Gallon fuel tank,

Stock #24032, Sale Price $57,000 Cab with AC and heat, 2 speed, Power bobtach, SJC Joystick controls Keyless start panel, 74HP Turbo Diesel, 12” wide tracks, 68” wide bucket, Machine weighs: 9000lbs Rated lift cap: 2450lbs, 28 gallon fuel tank,

Stock# 23153, Sale price $55,000 Cab A/C and heat, High flow auxiliary hydraulics, SJC joystick, 2 speed, Power bobtach, Automatic ride control/boom suspension, Bucket positioning, Deluxe keyless start panel, 92HP Turbo Diesel, Suspension seat,

Stock #23119, Sale Price $55,000 2000 gallon water tank, Front, rear and left side sprayers, Manual cable controlled water valves Rear hose reel, PTO driven pump, 299HP 6.7 Cummins Turbo Diesel, 6 speed manual trans, 25,999GVW 8,000miles

Stock #24053, Sale Price $54,000 Cab A/C and heat, Power bobtach, SJC joystick controls, Air ride cloth seat, Deluxe touchscreen start panel, Auto ride control / boom suspension, 74HP Turbo Diesel, Machine weighs 10,500lbs, 78” wide bucket,

Stock #24113, Sale Price $54,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, Foot controls, Air ride seat, Boom suspension/ride control, Reversing fan, Deluxe keyless start panel, Bucket positioning, 92HP Turbo Diesel,

Stock #24099, Sale Price $52,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, Foot controls, Air ride seat, Backup camera, Deluxe keyless start panel, Ride control / boom suspension, Bucket positioning, 92HP Turbo Diesel,

Stock #2495, Sale Price $52,000 Cab A/C and heat, High flow, Power bobtach, SJC joystick controls, 2 speed, Air ride cloth seat, Deluxe touchscreen start panel, 74HP Turbo Diesel, Machine weighs 10,500lbs, 18” wide tracks,

Stock #24018, Sale Price $52,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, SJC joystick controls, Bucket positioning, 92HP Turbo Diesel, Suspension seat,

Stock #23021, Sale Price $51,000 Open cab, Foot controls, Deluxe keyless panel, 74HP Turbo Diesel, Rated Operating Capacity: 2,900lb Auxiliary Std Flow: 23.3gal/min Suspension seat, With 72” wide bucket, Machine weights: 8,600lbs

Stock #24138, Sale Price $51,000 AC and heated cab, High flow, 2 speed, SCPA foot controls, Power bobtach, 14 X17.5 foam filled tires, 100HP Turbo Diesel, Machine weights: 11,000lbs

Stock #24114, Sale Price $51,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, Foot controls, Air ride seat, Ride control / boom suspension, Deluxe keyless start panel, Bucket positioning, 92HP Turbo Diesel,

Stock #24081, Sale Price $50,000 Cab A/C and heat, High flow auxiliary hydraulics, SJC joystick, 2 speed, Power bobtach, Bucket positioning, Deluxe keyless start panel, Reversing fan, Air ride seat, Automatic ride control/boom suspension, 92HP Turbo Diesel,

Stock #22180, Sale Price $50,000 24HP Kohler diesel, 500 gallon spoil tank, 580 CFM vacuum, 200 Gallon fresh water capacity Reverse Flow Manuel hose boom, 3000 PSI Pressure Water Electric brakes, 12,000lb GWR Trailer Hyd Door latch,

Stock #22106, Sale Price $49,500 Cab with A/C and heat, High flow, 2 speed, Deluxe Keyless start, SJC joystick controls, Power bobtach, Bucket positioning, Reversing fan, Automatic ride control, Suspension seat, Torsion suspension, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs,

Stock #24096, Sale Price $49,500 Cab with AC and heat, High flow, 2 speed, SJC joystick controls, Power bobtach, Bucket positioning, Air ride and heated seat, Backup camera Deluxe keyless panel, 92HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs

Stock #24112, Sale Price $49,000 Cab A/C and heat, Power bobtach, SJC joystick controls, 74HP Turbo Diesel, Keyless start panel, Machine weighs 10,500lbs, 18” wide tracks,

Stock #24144, Sale Price $48,000 38 Hp Kohler Gas engine, 1000CFM vacuum, 800 Gallon Spoil Tank 300 Gallon Water capacity, Reverse Flow 3000 PSI High Pressure Water Electric brakes, 14,000 GWR Trailer Hyd Door latch,

Stock #23123, Sale Price $48,000 Open cab, Foot controls, Deluxe keyless panel, 74HP Turbo Diesel, Rated Operating Capacity: 2,900lb Auxiliary Std Flow: 23.3gal/min Suspension seat, With 72” wide bucket, Machine weights: 8,600lbs

Stock #22046, Sale Price $46,000 High Flow 2 speed, Power quick coupler Back up camera, Auxiliary High Flow 40.4 gpm, Auxiliary 2nd Circuit 23.2 gpm, Hydraulic Pressure 3,481 psi Fuel Tank : 32 gal 111HP Kubota Turbo Diesel, Machine weighs 13,200lbs

Stock #24052, Sale Price $46,000 4 way angle back fill blade, Quick coupler, Keyless deluxe touchscreen panel, 42HP turbo Diesel, Factory radio, 2 speed, Machine weighs 9850lbs,

Stock #24028, Sale Price $46,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, Foot controls, Air ride seat, Ride control / boom suspension, Bucket positioning, 92HP Turbo Diesel,

Sale Price $46,000 Fusion – Intelligent Control Technology BH74SS / BH074SS3 61” wide cut, 76” overall width, 30 Carbide teeth, FGT type drum/rotor, Variable 2 speed motor option automatically adjusts to maximize rotor speed & torque, Requires High flow 30 to 50GPM, Pin on push bar, Requires electrical harness to machine, WHAT DOES FUSION DO? Monitor and control performance from Fusion app, Continuously self-tunes based on dynamic conditions. Temperature, altitude, carrier efficiency, and carrier settings Maximizes staying power and minimizes recovery time for peak performance Attachment weight: 2,790lbs With hoses and couplers, Fits to all high flow skid steers and compact track loaders

Stock #23052, Sale Price $45,000 Open cab, 2 speed, SJC joystick controls, Back up camera, 111HP Kubota Turbo Diesel, 18” wide tracks 78” wide machine Fuel Tank: 32 gal Machine weighs 13,000lbs

Stock #24140, Sale Price $44,000 AC and heated cab, Standard foot controls, Power bobtach, Deluxe keyless start panel Air ride suspension seat, Bucket positioning, 74HP Turbo Diesel, Machine weights: 8,800lbs

Stock #24003, Sale Price $43,000 AC and heated cab, High flow, SJC joystick controls, 2 speed, Power bobtach, Deluxe keyless start panel Suspension seat 74HP Turbo Diesel, Machine weights: 8,800lbs

Stock #23027, Sale Price $42,000 Quick coupler, Keyless deluxe touchscreen panel, 42HP turbo Diesel, Factory radio, 2 speed, Machine weighs 9400lbs,

60” wide cutting width Requires: 35-52 GPM high flow with case drain line, Danfoss H1B 110cc 2 speed motor 34-tooth cutting drum Attachment weighs: 2600lbs Low profile tooth available with knives or carbide, Secondary edge guard on the tooth anvil Hydraulic motor case overpressure protection (COP) Heavy-duty synchronous drive belt Single 1-inch high grade bolt tooth fastening system Sale price with carbide: $44,000 Sale price with knives: $42,000

Stock #24090, Sale Price $41,500 AC and heated cab, High Flow, Foot controls, 2 speed, Power bobtach, Deluxe keyless start panel, Suspension seat, Bucket positioning, 74HP Turbo Diesel, Machine weights: 8,500lbs

Stock #UA24094, Sale Price $41,000 Like new, only used 1 time. 63” wide working width, 75” overall width, 36 Carbide hammers, Fits to skids steers with 90 to 120 hp, Requires 29 to 40 GPM, Hydraulic Pressure required 3200-5080 PSI Requires 14 pin electrical harness, Weighs 2680lbs

Sale Price $41,000 BH74SS / BH074SS3 61” wide cut, 76” overall width, 30 Carbide teeth, FGT type drum/rotor, Variable 2 speed motor option automatically adjusts to maximize rotor speed & torque, Requires High flow 30 to 50GPM, Pin on push bar, Attachment weight: 2,790lbs With hoses and couplers, Fits to all high flow skid steers and compact track loaders, Used models available as well.

Stock #23172, Sale Price 41,000 Quick coupler, Hydraulic thumb with diverter valve, Long arm, Deluxe keyless start panel, Radio, 33.5HP Diesel, Machine weighs 7800lbs, Control pattern changer,

Stock #24035, Sale Price $39,000 47” Double Drum 33HP Kubota 1803 Diesel, 54 Gallon water tank, 9 Gallon fuel tank, Weighs 6,000lbs  

Sale price $39,000,  UA21079 8” cutting depth 1 ½” thick cutting drum, 76 teeth, 5” tooth clearance from drum,, Hydraulic side shift, Hydraulic depth and tilt adjustment, Attachment weighs 2,900lbs Requires high flow,  

Stock #23019, Sale Price $38,000 Foot controls Open cab, Keyless start panel, 74HP Turbo Diesel, 12” wide tracks, 66” wide bucket, Machine weighs: 9000lbs Rated lift cap: 2450lbs, 28 gallon fuel tank,

Stock # 22013, Sale price $37,000 Foot controls Open cab, 92HP Turbo Diesel, Keyless start deluxe panel, Power bobtach, Machine width: 78” Machine weighs: 10,500lbs  

Stock #UA24001, Sale Price $35,000 63” wide working width, 75” overall width, 36 Carbide hammers, Fits to skids steers with 90 to 120 hp, Requires 29 to 40 GPM, Hydraulic Pressure required 3200-5080 PSI Requires 14 pin electrical harness, Weighs 2680lbs

Stock #24001, Sale Price $34,000 Quick coupler, Deluxe keyless start panel, 24HP Diesel, Machine weighs 7500lbs, Control pattern changer,  

Stock #22161, Sale Price $34,000 Standard foot controls, Keyless deluxe panel, Power botach, 16” wide tracks 74HP turbo diesel, Machine weighs 8,000lbs 72” wide bucket

Stock #UA23089, Sale Price $32,000 6” cutting depth, 76 teeth, Hydraulic side shift, Hydraulic depth and tilt adjustment, Attachment weighs 2,200lbs Requires High flow 30 to 45 GPM, Requires hydraulic pressure 3000 – 3500psi, Requires 14pin electrical harness,

Stock #UA22094, Sale Price Energy Class : 4,000lb Actual weight: 3,800lbs, 5.10” Tool / chisel, Stick pin: 80mm Link pin: 80mm Space between pin bosses: 12.25” Center to center of pins: 18.5”

Stock #UA23032, Sale Price $30,000 60” wide cut, 2 speed, With pressure gauge, 30 Carbide teeth, Requires High flow, Attachment weight: 2,300lbs

Stock #UA24023, Sale Price $29,000 Like new, only used a few times, 60” wide cutting width Requires: 35-52 GPM high flow with case drain line, Danfoss H1B 110cc 2 speed motor 34-knives, (Carbide teeth could be installed) Attachment weighs: 2400lbs Secondary edge guard on the tooth anvil Hydraulic motor case overpressure protection (COP) Heavy-duty synchronous drive belt Single 1-inch high grade bolt tooth fastening system Sale price…….. $29,000 Available new for $42,000

Stock #24022, Sale Price $29,000 24HP Kubota turbo diesel 9.8″ wide tracks, Aux hydraulics, 4.9 mph travel speed Overall width 36″ With 36″ GP bucket, Auxiliary Hydraulic Flow 15 gpm Rated operating cap: 1000lbs Machine weighs: 3,000lbs

Stock #24039, Sale Price $28,000 31” Double Drum 20HP Kubota D902 Diesel, 26 Gallon water tank, 8 Gallon fuel tank, Weighs 3,400lbs  

Stock #23156, Sale Price $28,000 37HP Yanmar Diesel, Operating lift capacity: 1,062 lb, Tipping capacity: 3,035 lb, 10.5 Gallon fuel tank, Auxiliary hydraulics (13.9GPM) Machine width: 42” Bucket width: 44” (Bkt #UA23105) Machine weighs: 3650lbs,

Stock #UA23030, Sale Price $27,000 Skid Steer Wheel Saw / rock saw 24” max depth, 8” wide, Hydraulic side shift, Hydraulic depth adjustments, Requires 7 pin electrical control harness, Requires high flow, Attachment weighs: 2800lbs,

Stock #24038, Sale Price $26,000 39” Double Drum 24HP Kubota D1105 Diesel, water tank, 6 Gallon fuel tank, Weighs 3,700lbs

Stock #UA23115, Sale Price $26,000 15 Carbide cutters, Excavator mount, Requires case drain line on excavator, 100MM pins, 23” center to center of pins, 16 5/8” clear between pin bosses. Weighs 3200lbs Max pressure: 6000psi

Stock # UA21058, Sale price $25,000 60” Cutting width, Skid steer mount, 46 cutters, Requires minimum of 35GPM, Piston Motor with case drain, Pressure gauge, Heavy Duty HARDOX Construction, Chevron style tooth patter draws material in, Attachment weight:  3100lbs

Stock #22145, Sale Price $24,000 13.3 HP Diesel Max dig depth 8’6”, Expandable tracks, Machine width with tracks in 39”. Machine width with tracks out: 54” Machine weighs 4,300lbs With 8” wide bucket,

Stock #UA24072, Sale Price $23,000 Unused Skid Steer Wheel Saw / rock saw / concrete saw 17” max depth, 4” wide, Hydraulic side shift and depth adjustments, Hydraulic trench cleaner, Requires 5 hyd hose connection, Requires 8 pin or 14 pin electrical control harness, Requires high flow, Attachment weighs: 2500lbs,

Stock #24065, Sale Price $21,000 Sliding side shift trencher, 50/50 chain with rock and dirt teeth, Cuts 4’ deep X 6” wide, 49HP Deutz diesel, 6 way Front blade, Front weight kit, Machine weighs 6,000lbs,

Stock #24102, Sale Price $21,000 Standard foot controls Auxiliary hydraulics, Foam filled tires, 23HP Kubota Diesel engine, Machine weighs 3000lbs 36” wide bucket,

Stock #UA24070, Sale Price $20,000 Fits to Ditch Witch RT45, RT55, RT80 ride on machines Hydraulic side shift, With 1 used blade, In great condition and ready to work,

Stock #Ua24004, Sale Price $18,500 Bit diameter: 32” 20 – 42 GPM, 4250 max PSI, Low RPM auger bit (7-16 RPM) leads to easy clean-up, No high-speed flying debris for a safer work zone The STUMPEX can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass, Larger diameter stumps are processed by making additional passes, A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge, Weighs: 1,368lbs Fits to skid steers, Available new for $26,500 Used sale price…..$18,500

Blue Diamond Severe Duty Open Front Cutter 10″ Tree Capacity, Four Double-Edge Blades High torque piston motor Massive 1″ thick serrated blade carrier weighs over 500 lbs. Easy machine entry Adjustable skid shoes Cutter weighs 2000 lbs. Large pressure gauge 1 Year Mfg Warranty 72″ Standard flow..16-26GPM…$17,900 72″ High flow…27-35GPM…$17,900 72″ High Flow..36-45GPM..$17,900

84” cutting width Dual Motors with direct drive, 4 double-sided blades Cuts clockwise and counter clockwise Cut up to a 4″ tree, Wire protection kit on both blade carriers, Rated for 15-22 GPM Weighs : 1850lbs Adjustable height wheels Floating deck design for uneven ground Grease fittings on all pivots 1-year warranty

Sale Price $16,000, Stock #UA21073 60” wide cutting disc, Four point Hardened Steel teeth High flow, 32 to 45GPM HD Gear motor Weighs 2,300lbs

NEW M&M 16″ Tree shear – Dual cylinder shear w/ 48″ tree guard. Specifications: Cuts flush to the ground, Built-in 10 gallon chemical spray tank, Optional Spray System and Tree Grapple, Hidden grease fittings and hydraulic hoses which greatly reduces down time, 4″ chrome plated pins spiral cut hinge pins, Priced with hoses and couplers. AR-400 Blades Weighs 1950lbs 12″ Dual Cylinder Shear also available – $10,750.00 Call for Availability

Stock #UA24037, Sale Price $14,000 16″ max depth cut, Hydraulic depth adjustment, Vacuum hose connection, Universal skid steer mount, Center or offset cut, Mount can be attached to either end for push or pull operation, Requires 2 separate hydraulic circuits plus case drain (5 line set up) Max 25GPM hydraulic flow, Fits to Ditch Witch SK3000 skid steer and all other full size skid steers Attachment weight with out blade: 1400lbs Sale and rental prices do not include a blade,

Stock #UA23127, Sale Price $13,000 Car body forks, 64” wide carriage, 74” long x 6” X 3” fork tines, Attachment weight: 2300lbs Fits to: Volvo wheel loaders L50, L60, L70, L90, L110, L120 John Deere wheel loaders with HI Vis coupler, 524, 544, 624, 644 Like new, hardly used any if at all.

Stock #UA23080, Sale Price $13,000 Hydraulic Side shift, Hydraulic depth adjustment Hydraulic tilt, Requires minimum 35GPM Requires 7 pin electrical harness. Weights: 1200lbs

Stock #UA21061,  Sale price $13,000 2018 year model 26” cutter wheel with Greenteeth, Cuts forwards and Reverse, High torque piston motor, High flow required (36 to 45GPM), Case drain line required, Weights 720 lbs

Sale Price $12,900 Reach 18’ high, Saw head rotates 180 degrees hydraulicly, Requires 12volt control harness to rotate, Boom is foldable for transport, 24” x  72 tooth Carbide tipped blade, 3,000-rpm blade for clean cuts, Boom is foldable for transport, Hydraulic flow range (GPM) 10-30 Boom type: Steel Weighs; 600lbs

Stock #UA23023, Sale Price $12,500 Hydraulic Side shift, Hydraulic depth adjustment Hydraulic tilt, Requires minimum 35GPM Requires 7 pin electrical harness. Weights: 1300lbs

Stock #UA24109, Sale Price $12,000 18″ Cold Planer Hydraulic side shift, 21 to 31 GPM Weighs 1610lbs

Stock #UA23009, Sale Price $12,000 73” wide vibratory smooth drum, Max 22 GPM , Plastic drum scrapers/cleaners, Weighs : 2200lbs

Blue Diamond Extreme Duty Open Front Shredder 6″ Tree Capacity, Four Double-Edge Blades, Open Front w/ Push Bar, Comes w/ All Hoses & Couplers, Cutter turns clockwise and counterclockwise, 3/4″ Thick Blade Carrier, Wire Protection Kit under Deck, 3.5″ thick blade carrier shaft passes thru large grease packed bearing housing, Direct Drive, Cut-away Back 1 Year Mfg Warranty Weighs : 1547 lbs. 72″ cut, 16-26GPM …..$11,500 60″ cut, 16-26GPM……$10,500 72″ cut, 27-35GPM……call 60″ cut, 27-35GPM……call

Stock #UA22105, Sale Price $11,500 Vibratory post driver, With Hydraulic tilt left to right option, Requires 7-26 GPM auxiliary flow, Requires case drain line, Requires electrical harness for tilt option. Has 12″ round post adapter (other sizes available) Weighs 675 lbs. Used price……$11,500 Available new for….$16,200

Stock #UA24059, Sale Price $11,000 JRB 420 series coupler Fork tines are 8” X 3.5” X 72” long, Carriage is 106”wide, Attachment weighs: 3,500lbs Fits to John Deere wheel loaders: 744K, 744L, Also fits to other brand loaders with JRB 420 coupler, Doosan, Case, Hitachi, Komatsu, and more

 POWER RAKE -SEVERE DUTY -SERIES 3 6,000 Series hydraulic motor Airless tires Replaceable teeth and carbide options 3/8” thick wall tube frame 1.5” motor shaft and high pressure seals 8” drum diameter, 13” including teeth With skid steer mount and manual angle. Hydraulic angle available for additional cost 84″ weighs 1,225 lbs,……..$17,550 96″ weighs 1,275 lbs,……..$18,000 120″ ………………………..$19,500 Call for price of your machine specific control harness for hydraulic angle option Rental rates: $200/day, $600/week, $1,800/month POWER RAKE -EXTREME DUTY With skid steer mount and manual angle. Hydraulic angle available for additional cost 72” Extreme duty, Fixed teeth, weighs 1,100lbs…..$12,900 84” Extreme duty, Fixed teeth, weighs 1,130lbs……$13,200 96” Extreme duty, Fixed teeth, weights 1,155lbs…..$13,500 POWER RAKE -HEAVY DUTY SERIES 2 With skid steer mount and manual angle. Hydraulic angle available for additional cost 48” HD2, Fixed teeth, weighs 696lbs……….…$9,000 60” HD2, Fixed teeth,  weighs 754lbs………… $9,300 72” HD2, Fixed teeth, weighs 884lbs …………$9,700

3 Blades, Direct drive-thru bearing housing Turns clockwise and counterclockwise, 80CC Motor, 13-20GPM, Universal Mini Mount Weights 770lbs, With hoses and couplers, 50″ wide model sale price…$9,000 42″ wide model sale price…$7,800

Stock #UA24020, Sale Price $8,500 Dual cylinder 48” high brush guard Cuts flush to the ground, Built-in 10 gallon chemical spray tank and 12 volt pump, 4″ chrome plated pins spiral cut hinge pins, AR-400 Blades Weighs 1950lbs Available new for $14,000 Sale price………………$8,500

Stock #UA24051, Sale Price $8,500 JRB 418 series coupler Fork tines are 7” X 2.75” X 72” long, Carriage is 78”wide, Attachment weighs: 2,600lbs Fits to John Deere wheel loaders with JRB 418 coupler: 624k, 624L, 644K, 644L, 724K, 724L, Also fits to other brand loaders with JRB 418 coupler, Doosan, Case, Hitachi, Komatsu, and more

Stock #UA22088, Sale Price $8,500 Series 2 Premium pick-up broom With water tank, 12volt pump and sprayers, Heavy 2″ main shaft, oversized 6″ bearings 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Available new for $13,600

Stock #UA24082, Sale Price $8,500 750lb Class hammer / breaker With skid steer mount and hoses, Weight with mount: 1050lbs Tool Diameter: 2.75” Flow Range: 10-22 GPM Impact Rate: 500 – 1,200 BPM

Stock #22116, Sale Price $8,500 Vibratory post driver, Requires 7-26 GPM auxiliary flow, Requires case drain line, Has 6″ post adapter (other sizes available) Weighs 300 lbs. Used price……$8,500 New Sale price….$13,500

Stock #UA24021, Sale Price $7,500 84” wide 29” tall, Requires 14 pin electrical harness, Weighs 1400lbs,

Stock #UA23008, Sale Price $7,500 48” max depth, Set up for 6” wide dirt cups, Hydraulic Side shift, Standard flow, max 22GPM, Weights: 1000lbs

Stock #UA22102, Sale Price $7,500 Series 2 Premium pick-up broom Heavy 2″ main shaft, oversized 6″ bearings, 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Sale price……$7,500 Available new for $13,600

Stock #UA22126, Sale Price $7,500 Volvo / John Deere Hi-vis coupler Fits to Volvo L60, L70, L90, L110, L120 loaders Fits to John Deere 444, 524, 544, 624, 644 loaders with Hi-vis coupler, Fork tines are 6” X 2.5” X 48” long, Carriage is 12’ 1” wide  

Stock #UA21096, Sale Price: $7,000(USED) 42″ wide cutting width 3 Blade system 6″ cutting capacity 3/4″ Thick blade carrier High torque piston motor 16 to 25 GPM Cutaway side No case drain needed Wire protection kit under deck Grease filled bearing drive housing Fits to Mini Excavators: 10,000lb to 19,000lb Has Kubota mount for KX040, KX057, KX080 Weighs 730lbs New price…$11,400 Used Price…$8,000  

Blue Diamond Severe Duty Root Grapples, Dual cylinder, Dual top clamps, 1/2″ AR36 Steel top and bottom tines, Heavy Duty Cylinders with cylinder protectors, One Piece Tines, Solid QA Area No Pinch Hose Routing Reinforced Top Clamps 66″ Root Grapple : $6,600.00 72″ Root Grapple : $6,700.00 78″ Root Grapple : $6,800.00 84″ Root Grapple : $6,900.00

Stock #UA21060, Sale Price $6,5000 50” wide cutting width, 3 Blades, Direct drive-thru bearing housing Turns clockwise and counterclockwise, 80CC Motor, 13-20GPM, Universal Mini Mount Weights 770lbs, With hoses and couplers, Fits to Vermeer, Ditch Witch, Wacker Neuson, Dingo and other brands, Machine photos is not included, Available new for …$9,600 Used price…$6,500

Stock #UA23090, Sale Price $6,000 48” dig depth, Set up for 6” wide cut with double dirt cups, Manual side shift, Standard flow max 25GPM, Direct drive Eaton motor, With crumber / trench cleaner, Fits to all skid steers, Weighs 1,200lbs,

Stock # UA22016 72” wide tilling width, Standard flow  (11-22GPM) Weighs 930 lbs  

Stock #UA23060, Sale Price $6,900 84” wide, Hydraulic angle, 32” Poly bristles, Fits to all Bobcat brand skid steers, Requires 7 pin electrical harness, Attachment weighs 950lbs,

Stock #UA20023, Sale Price $5,900 Cat / Balderson Quick Coupler mount, Fork tines are 6” X 2.5” X 95” long, Carriage is 100” wide, Attachment weighs: 2,300lbs Fits to Cat Wheel loaders with Balderson Q/C:  926G, 928G, 938G, 950G, and more

Stock #UA22095, Sale Price $5,500 150lb Class hammer / breaker With Bobcat MT mini mount Fits to Bobcat MT55, MT85, MT100, and Bobcat S70 Skid steers Weighs 250lbs

Stock #UA23122, Sale Price $5,500 36” max depth, 8” wide rock/dirt chain, 8- 14 GPM, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Weighs: 715lbs New price $6,800 Used price $5,500

Stock #UA22106, Sale Price $5,300 35 ton Capacity, Inverted design, 2 way wedge , Very heavy-duty sliders Opens to 30″ Weighs 950LBS Fits to all skid steers, Available new for $6,300 Used sale price…………..$5,300

Stock #UA23016, Sale Price $5,000 Fits to all skid steer loaders, 1.1yard heaped capacity, .95yard struck capacity, Over all dimensions: 45” X 84”, Hopper is 36” wide,

Stock #UA23121, Sale Price $4,800 56” wide tilling width, Standard flow  (11-22GPM) 6″ tilling depth, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Weighs: 420 lbs New price $6,500 Used price $4,800

Stock# UA21095,  sale price $4,500 48” wide, Manual angle, Poly Bristles Fits to Vermeer, Ditch Witch , Toro and other mini skid steers, Weighs 646lbs  

Blue Diamond EX4 Extreme Duty Series 2 Auger Torque ft-lbs @ 3000 Psi….3275 Max Torque ft-lbs 3500 Psi….3821 Recommended Flow (GPM)…..10-30 Peak Efficiency (GPM)…..19-23 Motor Type…….Eaton Max Pressure – Do Not Exceed………..3500 psi @ 16 gpm Max Flow – Do Not Exceed……30 gpm @ 1800 psi Standard Output Shaft……..2″ Hex Max Drilling Diameter Clay/Shale…..24” Max Drilling Diameter Earth……….30” Weight….123lbs Compact high torque manufactured gearbox 2 piece shaft design ensuring maximum side load ratings 5-yr gearbox warranty, 3-yr motor warranty, and lifetime shaft pull-out warranty

Stock #UA23116, Sale Price $4,000 60lb Class hammer / breaker 1.5” tool diameter, Weighs 130lbs, 4” between pin bosses 30mm (1 3/16) pin