Attachments For Rent

Stock #UA22118, Sale Price $58,000 Energy Class : 8,500lb Actual weight: 7350lbs, 6.28” Tool / chisel, Auto greaser, Impact Frequency: 400-505  bpm Stick pin: 100mm Link pin: 90mm Space between pin bosses: 15.25” Center to center of pins: 19.5” Rated Flow: 58 GPM to 79 GPM Minimum Operating Pressure: 2176 PSI  to 2321 PSI

Sale Price $46,000 Fusion – Intelligent Control Technology BH74SS / BH074SS3 61” wide cut, 76” overall width, 30 Carbide teeth, FGT type drum/rotor, Variable 2 speed motor option automatically adjusts to maximize rotor speed & torque, Requires High flow 30 to 50GPM, Pin on push bar, Requires electrical harness to machine, WHAT DOES FUSION DO? Monitor and control performance from Fusion app, Continuously self-tunes based on dynamic conditions. Temperature, altitude, carrier efficiency, and carrier settings Maximizes staying power and minimizes recovery time for peak performance Attachment weight: 2,790lbs With hoses and couplers, Fits to all high flow skid steers and compact track loaders

60” wide cutting width Requires: 35-52 GPM high flow with case drain line, Danfoss H1B 110cc 2 speed motor 34-tooth cutting drum Attachment weighs: 2600lbs Low profile tooth available with knives or carbide, Secondary edge guard on the tooth anvil Hydraulic motor case overpressure protection (COP) Heavy-duty synchronous drive belt Single 1-inch high grade bolt tooth fastening system Sale price with carbide: $44,000 Sale price with knives: $42,000

Stock #UA24094, Sale Price $41,000 Like new, only used 1 time. 63” wide working width, 75” overall width, 36 Carbide hammers, Fits to skids steers with 90 to 120 hp, Requires 29 to 40 GPM, Hydraulic Pressure required 3200-5080 PSI Requires 14 pin electrical harness, Weighs 2680lbs

Sale Price $41,000 BH74SS / BH074SS3 61” wide cut, 76” overall width, 30 Carbide teeth, FGT type drum/rotor, Variable 2 speed motor option automatically adjusts to maximize rotor speed & torque, Requires High flow 30 to 50GPM, Pin on push bar, Attachment weight: 2,790lbs With hoses and couplers, Fits to all high flow skid steers and compact track loaders, Used models available as well.

Sale price $39,000,  UA21079 8” cutting depth 1 ½” thick cutting drum, 76 teeth, 5” tooth clearance from drum,, Hydraulic side shift, Hydraulic depth and tilt adjustment, Attachment weighs 2,900lbs Requires high flow,  

Stock #UA24001, Sale Price $35,000 63” wide working width, 75” overall width, 36 Carbide hammers, Fits to skids steers with 90 to 120 hp, Requires 29 to 40 GPM, Hydraulic Pressure required 3200-5080 PSI Requires 14 pin electrical harness, Weighs 2680lbs

Stock #UA23089, Sale Price $32,000 6” cutting depth, 76 teeth, Hydraulic side shift, Hydraulic depth and tilt adjustment, Attachment weighs 2,200lbs Requires High flow 30 to 45 GPM, Requires hydraulic pressure 3000 – 3500psi, Requires 14pin electrical harness,

Stock #UA22094, Sale Price Energy Class : 4,000lb Actual weight: 3,800lbs, 5.10” Tool / chisel, Stick pin: 80mm Link pin: 80mm Space between pin bosses: 12.25” Center to center of pins: 18.5”

Stock #UA23032, Sale Price $30,000 60” wide cut, 2 speed, With pressure gauge, 30 Carbide teeth, Requires High flow, Attachment weight: 2,300lbs

Stock #UA24023, Sale Price $29,000 Like new, only used a few times, 60” wide cutting width Requires: 35-52 GPM high flow with case drain line, Danfoss H1B 110cc 2 speed motor 34-knives, (Carbide teeth could be installed) Attachment weighs: 2400lbs Secondary edge guard on the tooth anvil Hydraulic motor case overpressure protection (COP) Heavy-duty synchronous drive belt Single 1-inch high grade bolt tooth fastening system Sale price…….. $29,000 Available new for $42,000

Stock #UA23030, Sale Price $27,000 Skid Steer Wheel Saw / rock saw 24” max depth, 8” wide, Hydraulic side shift, Hydraulic depth adjustments, Requires 7 pin electrical control harness, Requires high flow, Attachment weighs: 2800lbs,

Stock #UA23115, Sale Price $26,000 15 Carbide cutters, Excavator mount, Requires case drain line on excavator, 100MM pins, 23” center to center of pins, 16 5/8” clear between pin bosses. Weighs 3200lbs Max pressure: 6000psi

Stock # UA21058, Sale price $25,000 60” Cutting width, Skid steer mount, 46 cutters, Requires minimum of 35GPM, Piston Motor with case drain, Pressure gauge, Heavy Duty HARDOX Construction, Chevron style tooth patter draws material in, Attachment weight:  3100lbs

Stock #UA24072, Sale Price $23,000 Unused Skid Steer Wheel Saw / rock saw / concrete saw 17” max depth, 4” wide, Hydraulic side shift and depth adjustments, Hydraulic trench cleaner, Requires 5 hyd hose connection, Requires 8 pin or 14 pin electrical control harness, Requires high flow, Attachment weighs: 2500lbs,

Stock #UA24070, Sale Price $20,000 Fits to Ditch Witch RT45, RT55, RT80 ride on machines Hydraulic side shift, With 1 used blade, In great condition and ready to work,

Stock #Ua24004, Sale Price $18,500 Bit diameter: 32” 20 – 42 GPM, 4250 max PSI, Low RPM auger bit (7-16 RPM) leads to easy clean-up, No high-speed flying debris for a safer work zone The STUMPEX can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass, Larger diameter stumps are processed by making additional passes, A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge, Weighs: 1,368lbs Fits to skid steers, Available new for $26,500 Used sale price…..$18,500

Blue Diamond Severe Duty Open Front Cutter 10″ Tree Capacity, Four Double-Edge Blades High torque piston motor Massive 1″ thick serrated blade carrier weighs over 500 lbs. Easy machine entry Adjustable skid shoes Cutter weighs 2000 lbs. Large pressure gauge 1 Year Mfg Warranty 72″ Standard flow..16-26GPM…$17,900 72″ High flow…27-35GPM…$17,900 72″ High Flow..36-45GPM..$17,900

84” cutting width Dual Motors with direct drive, 4 double-sided blades Cuts clockwise and counter clockwise Cut up to a 4″ tree, Wire protection kit on both blade carriers, Rated for 15-22 GPM Weighs : 1850lbs Adjustable height wheels Floating deck design for uneven ground Grease fittings on all pivots 1-year warranty

Sale Price $16,000, Stock #UA21073 60” wide cutting disc, Four point Hardened Steel teeth High flow, 32 to 45GPM HD Gear motor Weighs 2,300lbs

NEW M&M 16″ Tree shear – Dual cylinder shear w/ 48″ tree guard. Specifications: Cuts flush to the ground, Built-in 10 gallon chemical spray tank, Optional Spray System and Tree Grapple, Hidden grease fittings and hydraulic hoses which greatly reduces down time, 4″ chrome plated pins spiral cut hinge pins, Priced with hoses and couplers. AR-400 Blades Weighs 1950lbs 12″ Dual Cylinder Shear also available – $10,750.00 Call for Availability

Stock #UA24037, Sale Price $14,000 16″ max depth cut, Hydraulic depth adjustment, Vacuum hose connection, Universal skid steer mount, Center or offset cut, Mount can be attached to either end for push or pull operation, Requires 2 separate hydraulic circuits plus case drain (5 line set up) Max 25GPM hydraulic flow, Fits to Ditch Witch SK3000 skid steer and all other full size skid steers Attachment weight with out blade: 1400lbs Sale and rental prices do not include a blade,

Stock #UA23127, Sale Price $13,000 Car body forks, 64” wide carriage, 74” long x 6” X 3” fork tines, Attachment weight: 2300lbs Fits to: Volvo wheel loaders L50, L60, L70, L90, L110, L120 John Deere wheel loaders with HI Vis coupler, 524, 544, 624, 644 Like new, hardly used any if at all.

Stock #UA23080, Sale Price $13,000 Hydraulic Side shift, Hydraulic depth adjustment Hydraulic tilt, Requires minimum 35GPM Requires 7 pin electrical harness. Weights: 1200lbs

Stock #UA21061,  Sale price $13,000 2018 year model 26” cutter wheel with Greenteeth, Cuts forwards and Reverse, High torque piston motor, High flow required (36 to 45GPM), Case drain line required, Weights 720 lbs

Sale Price $12,900 Reach 18’ high, Saw head rotates 180 degrees hydraulicly, Requires 12volt control harness to rotate, Boom is foldable for transport, 24” x  72 tooth Carbide tipped blade, 3,000-rpm blade for clean cuts, Boom is foldable for transport, Hydraulic flow range (GPM) 10-30 Boom type: Steel Weighs; 600lbs

Stock #UA23023, Sale Price $12,500 Hydraulic Side shift, Hydraulic depth adjustment Hydraulic tilt, Requires minimum 35GPM Requires 7 pin electrical harness. Weights: 1300lbs

Stock #UA24109, Sale Price $12,000 18″ Cold Planer Hydraulic side shift, 21 to 31 GPM Weighs 1610lbs

Stock #UA23009, Sale Price $12,000 73” wide vibratory smooth drum, Max 22 GPM , Plastic drum scrapers/cleaners, Weighs : 2200lbs

Blue Diamond Extreme Duty Open Front Shredder 6″ Tree Capacity, Four Double-Edge Blades, Open Front w/ Push Bar, Comes w/ All Hoses & Couplers, Cutter turns clockwise and counterclockwise, 3/4″ Thick Blade Carrier, Wire Protection Kit under Deck, 3.5″ thick blade carrier shaft passes thru large grease packed bearing housing, Direct Drive, Cut-away Back 1 Year Mfg Warranty Weighs : 1547 lbs. 72″ cut, 16-26GPM …..$11,500 60″ cut, 16-26GPM……$10,500 72″ cut, 27-35GPM……call 60″ cut, 27-35GPM……call

Stock #UA22105, Sale Price $11,500 Vibratory post driver, With Hydraulic tilt left to right option, Requires 7-26 GPM auxiliary flow, Requires case drain line, Requires electrical harness for tilt option. Has 12″ round post adapter (other sizes available) Weighs 675 lbs. Used price……$11,500 Available new for….$16,200

Stock #UA24059, Sale Price $11,000 JRB 420 series coupler Fork tines are 8” X 3.5” X 72” long, Carriage is 106”wide, Attachment weighs: 3,500lbs Fits to John Deere wheel loaders: 744K, 744L, Also fits to other brand loaders with JRB 420 coupler, Doosan, Case, Hitachi, Komatsu, and more

 POWER RAKE -SEVERE DUTY -SERIES 3 6,000 Series hydraulic motor Airless tires Replaceable teeth and carbide options 3/8” thick wall tube frame 1.5” motor shaft and high pressure seals 8” drum diameter, 13” including teeth With skid steer mount and manual angle. Hydraulic angle available for additional cost 84″ weighs 1,225 lbs,……..$17,550 96″ weighs 1,275 lbs,……..$18,000 120″ ………………………..$19,500 Call for price of your machine specific control harness for hydraulic angle option Rental rates: $200/day, $600/week, $1,800/month POWER RAKE -EXTREME DUTY With skid steer mount and manual angle. Hydraulic angle available for additional cost 72” Extreme duty, Fixed teeth, weighs 1,100lbs…..$12,900 84” Extreme duty, Fixed teeth, weighs 1,130lbs……$13,200 96” Extreme duty, Fixed teeth, weights 1,155lbs…..$13,500 POWER RAKE -HEAVY DUTY SERIES 2 With skid steer mount and manual angle. Hydraulic angle available for additional cost 48” HD2, Fixed teeth, weighs 696lbs……….…$9,000 60” HD2, Fixed teeth,  weighs 754lbs………… $9,300 72” HD2, Fixed teeth, weighs 884lbs …………$9,700

3 Blades, Direct drive-thru bearing housing Turns clockwise and counterclockwise, 80CC Motor, 13-20GPM, Universal Mini Mount Weights 770lbs, With hoses and couplers, 50″ wide model sale price…$9,000 42″ wide model sale price…$7,800

Stock #UA24020, Sale Price $8,500 Dual cylinder 48” high brush guard Cuts flush to the ground, Built-in 10 gallon chemical spray tank and 12 volt pump, 4″ chrome plated pins spiral cut hinge pins, AR-400 Blades Weighs 1950lbs Available new for $14,000 Sale price………………$8,500

Stock #UA24051, Sale Price $8,500 JRB 418 series coupler Fork tines are 7” X 2.75” X 72” long, Carriage is 78”wide, Attachment weighs: 2,600lbs Fits to John Deere wheel loaders with JRB 418 coupler: 624k, 624L, 644K, 644L, 724K, 724L, Also fits to other brand loaders with JRB 418 coupler, Doosan, Case, Hitachi, Komatsu, and more

Stock #UA22088, Sale Price $8,500 Series 2 Premium pick-up broom With water tank, 12volt pump and sprayers, Heavy 2″ main shaft, oversized 6″ bearings 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Available new for $13,600

Stock #UA24082, Sale Price $8,500 750lb Class hammer / breaker With skid steer mount and hoses, Weight with mount: 1050lbs Tool Diameter: 2.75” Flow Range: 10-22 GPM Impact Rate: 500 – 1,200 BPM

Stock #22116, Sale Price $8,500 Vibratory post driver, Requires 7-26 GPM auxiliary flow, Requires case drain line, Has 6″ post adapter (other sizes available) Weighs 300 lbs. Used price……$8,500 New Sale price….$13,500

Stock #UA24021, Sale Price $7,500 84” wide 29” tall, Requires 14 pin electrical harness, Weighs 1400lbs,

Stock #UA23008, Sale Price $7,500 48” max depth, Set up for 6” wide dirt cups, Hydraulic Side shift, Standard flow, max 22GPM, Weights: 1000lbs

Stock #UA22102, Sale Price $7,500 Series 2 Premium pick-up broom Heavy 2″ main shaft, oversized 6″ bearings, 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Sale price……$7,500 Available new for $13,600

Stock #UA22126, Sale Price $7,500 Volvo / John Deere Hi-vis coupler Fits to Volvo L60, L70, L90, L110, L120 loaders Fits to John Deere 444, 524, 544, 624, 644 loaders with Hi-vis coupler, Fork tines are 6” X 2.5” X 48” long, Carriage is 12’ 1” wide  

Stock #UA21096, Sale Price: $7,000(USED) 42″ wide cutting width 3 Blade system 6″ cutting capacity 3/4″ Thick blade carrier High torque piston motor 16 to 25 GPM Cutaway side No case drain needed Wire protection kit under deck Grease filled bearing drive housing Fits to Mini Excavators: 10,000lb to 19,000lb Has Kubota mount for KX040, KX057, KX080 Weighs 730lbs New price…$11,400 Used Price…$8,000  

Blue Diamond Severe Duty Root Grapples, Dual cylinder, Dual top clamps, 1/2″ AR36 Steel top and bottom tines, Heavy Duty Cylinders with cylinder protectors, One Piece Tines, Solid QA Area No Pinch Hose Routing Reinforced Top Clamps 66″ Root Grapple : $6,600.00 72″ Root Grapple : $6,700.00 78″ Root Grapple : $6,800.00 84″ Root Grapple : $6,900.00

Stock #UA21060, Sale Price $6,5000 50” wide cutting width, 3 Blades, Direct drive-thru bearing housing Turns clockwise and counterclockwise, 80CC Motor, 13-20GPM, Universal Mini Mount Weights 770lbs, With hoses and couplers, Fits to Vermeer, Ditch Witch, Wacker Neuson, Dingo and other brands, Machine photos is not included, Available new for …$9,600 Used price…$6,500

Stock #UA23090, Sale Price $6,000 48” dig depth, Set up for 6” wide cut with double dirt cups, Manual side shift, Standard flow max 25GPM, Direct drive Eaton motor, With crumber / trench cleaner, Fits to all skid steers, Weighs 1,200lbs,

Stock # UA22016 72” wide tilling width, Standard flow  (11-22GPM) Weighs 930 lbs  

Stock #UA23060, Sale Price $6,900 84” wide, Hydraulic angle, 32” Poly bristles, Fits to all Bobcat brand skid steers, Requires 7 pin electrical harness, Attachment weighs 950lbs,

Stock #UA20023, Sale Price $5,900 Cat / Balderson Quick Coupler mount, Fork tines are 6” X 2.5” X 95” long, Carriage is 100” wide, Attachment weighs: 2,300lbs Fits to Cat Wheel loaders with Balderson Q/C:  926G, 928G, 938G, 950G, and more

Stock #UA22095, Sale Price $5,500 150lb Class hammer / breaker With Bobcat MT mini mount Fits to Bobcat MT55, MT85, MT100, and Bobcat S70 Skid steers Weighs 250lbs

Stock #UA23122, Sale Price $5,500 36” max depth, 8” wide rock/dirt chain, 8- 14 GPM, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Weighs: 715lbs New price $6,800 Used price $5,500

Stock #UA22106, Sale Price $5,300 35 ton Capacity, Inverted design, 2 way wedge , Very heavy-duty sliders Opens to 30″ Weighs 950LBS Fits to all skid steers, Available new for $6,300 Used sale price…………..$5,300

Stock #UA23016, Sale Price $5,000 Fits to all skid steer loaders, 1.1yard heaped capacity, .95yard struck capacity, Over all dimensions: 45” X 84”, Hopper is 36” wide,

Stock #UA23121, Sale Price $4,800 56” wide tilling width, Standard flow  (11-22GPM) 6″ tilling depth, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Weighs: 420 lbs New price $6,500 Used price $4,800

Stock# UA21095,  sale price $4,500 48” wide, Manual angle, Poly Bristles Fits to Vermeer, Ditch Witch , Toro and other mini skid steers, Weighs 646lbs  

Blue Diamond EX4 Extreme Duty Series 2 Auger Torque ft-lbs @ 3000 Psi….3275 Max Torque ft-lbs 3500 Psi….3821 Recommended Flow (GPM)…..10-30 Peak Efficiency (GPM)…..19-23 Motor Type…….Eaton Max Pressure – Do Not Exceed………..3500 psi @ 16 gpm Max Flow – Do Not Exceed……30 gpm @ 1800 psi Standard Output Shaft……..2″ Hex Max Drilling Diameter Clay/Shale…..24” Max Drilling Diameter Earth……….30” Weight….123lbs Compact high torque manufactured gearbox 2 piece shaft design ensuring maximum side load ratings 5-yr gearbox warranty, 3-yr motor warranty, and lifetime shaft pull-out warranty

Stock #UA23116, Sale Price $4,000 60lb Class hammer / breaker 1.5” tool diameter, Weighs 130lbs, 4” between pin bosses 30mm (1 3/16) pin

Stock #UA22037, Sale Price $3,900 74” wide Extreme duty series, Dual cylinder, Additional bolt on cutting edge, Weighs 960lbs, Other styles and sizes available new or used,

Sale Price $3,850 2-in Hex Output Shaft Max. bit size 36 in Gear Type: Planetary Min./Max. Flow: 20-35 GPM Max. PSI: 3500 PSI Weight with skid steer mount and hoses: 319 lbs M-Series Hydraulic Auger Drives: 5-Year Limited Warranty Speed Output 20 GPM               50 RPM 25 GPM               62 RPM 30 GPM               75 RPM 35 GPM               87 RPM Torque Output 2000 PSI             2459 ft. lbs. 2500 PSI             3075 ft. lbs. 3000 PSI             3688 ft. lbs. 3500 PSI             4303 ft. lbs. Sold with skid steer mount, hoses and flat face couplers.

Blue Diamond Tree / Post Puller Enclosed Single Cylinder, Heavily Gusseted Quick Attach Mount Four Rows of Teeth Opens to 11″ Weighs: 415 lbs. Great for removing posts or small trees / shrubs with minimal ground disturbance!

Stock #UA24010, Sale Price $3,500 60” wide Severe duty series, Dual cylinder/dual top clamps, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Mount could be changed to fit other larger skid steers,

Stock #UA23118, Sale Price $2,900 48” wide Dual cylinder, Universal mini mount plate, Fits to Vermeer, Ditch witch, Toro, Wacker Neuson and more, Weighs: 360lbs New price $3,400 Used price $2,900

  36” wide, Single cylinder, Weighs 360lbs, Ref #22021  

Weight: 443 lbs. Replaceable HD bucket teeth, 4″ square tube Formed bottom with 1″ x 8″ cutting edge